Fan layout on an 18000 with sample failure messages.

Version 1

    Fan layout on an 18000 with sample failure messages.

     

    This information applies to the following Product(s):
    - Snap Server 18000

     

    This information applies to the following Operating System(s):
    - This information is not Operating System specific ---Solution--- The 18000 has a total of 9 fans. A picture with the top cover off an 18000 can be found in the web administration page under Monitor>>System Status. There are two rows of fans towards the front half of the unit. One row contains 5 fans and the other has 4 fans.

     


    Here is a layout of the fans.

     


    Rear
    Chassis Fan1A| |CPU_2 FanA| |CPU_1 FanA| |Chassis Fan2A| |Chassis Fan3A
    Chassis Fan1B| |CPU_2 FanB| |CPU_1 FanB| |Chassis Fan2B| |No fan

     

    Front
    If the fan fails to spin or spins slower than expected, the amber LED on the failed fan should be lit. Here is a sample of fan messages in the event of a fan failure. Note the intentional removal of a fan will trigger a failure message.

     


    Qhwmon: Chassis Fan1B is slow, try to kick start it.
    Qhwmon: ***************************************
    Qhwmon: *******  !!!Chassis Fan1B REPORT!!!  ********
    Qhwmon: ******* FAN is stopped, or slow *******
    Qhwmon: ***************************************
    emud: Fan(s): FanEvent: Head Unit Chassis Fan1B is either running slow, or has failed. FanEvent: Chassis Fan Item 2

     

    Qhwmon: Chassis Fan2A is slow, try to kick start it.
    Qhwmon: ***************************************
    Qhwmon: *******  !!!Chassis Fan2A REPORT!!!  ********
    Qhwmon: ******* FAN is stopped, or slow *******
    Qhwmon: ***************************************
    emud: Fan(s): FanEvent: Head Unit Chassis Fan2A is either running slow, or has failed. FanEvent: Chassis Fan Item 3

     

    Qhwmon: CPU_2 FanB is slow, try to kick start it.
    Qhwmon: ***************************************
    Qhwmon: *******  !!!CPU_2 FanB REPORT!!!  ********
    Qhwmon: ******* FAN is stopped, or slow *******
    Qhwmon: ***************************************
    emud: Fan(s): FanEvent: Head Unit CPU_2 FanB is either running slow, or has failed. FanEvent: CPU Fan Item 4

     

     

     

     

     

    entryID:8611