SnapSAN 3000/5000/Expansion Add-on/Spare Controller/Adaptor Instructions

Version 1

    This document describes how to add a second controller module to or remove and replace an existing controller in a SnapSAN 3000 or 5000 disk array from Overland Storage. It also can be used to swap out an adapter in a SnapSAN Expansion unit. Both the controllers and adapters are hot-swappable so they can be replaced without powering down the system. While the adapters come configured for multi-pathing, alternate paths must be configured to the Logical Disks for the controllers using either the SnapSAN Path Manager or native MPIO.