What is the default setting for the SnapServer (GuardianOS)'s Ethernet ports?

Version 1

    What is the default setting for the SnapServer (GuardianOS)'s Ethernet ports?

     

    ---Solution---

     

    The default setting for both Ethernet ports on the SnapServer (GuardianOS) is autonegotiate. To change this setting to fixed (forced), use the Network TCP/IP screen to select the fixed setting.  Then, make the corresponding change to the switch.  You may experience connectivity issues if there is a port setting mismatch between the Snap Server and the switch.  If the Snap Server does not connect to the network, the Link light on the front panel will be off or amber.