How to re-activate S2S v1 after upgrading the GuardianOS to 3.1.079?

Version 1

    How to re-activate S2S v1 after upgrading the GuardianOS to 3.1.079.

     

    Applies to SnapServer 4200, SnapServer 4400, SnapServer 4500, SnapServer 14000, SnapServer 15000

    Information is not Operating System specific

     

    ---Solution---

     

    WARNING: S2Sv1 is not available or supported on servers shipped with version GuardianOS 3.1.079 or on servers that have been upgraded to version higher than 3.1.079. Support for S2Sv1 discontinues as of July 30th, 2005

     

    Reactivation Steps:

    1. 1. Login to the web administration page.
    2. 2. Point the browser to the /admin/debug.cgi page. (A command box should appear)
    3. 3. Copy and paste the entire command below in:   mv /usr/snap_extension/framework/snapex/snaplets/jars/serversync.save /usr/snap_extension/framework/snapex/snaplets/jars/serversync.jar
    4. 4. Click OK
    5. 5. Reboot the server.

    S2Sv1 will appear as the last link in the SnapExtensions page.</li>
    </ol>
    <br>