How to change GuardianOS Server bonding status from Load Balancing/Failover back to standalone?

Version 1

    How to change GuardianOS server bonding status from load balance/failover back to standalone?

     

    This information is not Operating System specific

     

    ---Solution---

     

    While in the network, TCP/IP section of the web administration interface, change the bonding status by changing the IP address of Ethernet 1 (for example, from X.X.X.41 to X.X.X.42), then change the bonding status to standalone, and then click the Save button.

     

    Wait about one minute and point the browser to the new IP address (example -- X.X.X.42). Reassign the IP address for Ethernet 1 if desire.

     

    Note: In standalone mode, Ethernet 2?s IP address should be changed to a different subnet, or disconnected.