Unable to start SSH from the command line interface.

Version 1

    Unable to run SSH from the CLI?

    This information applies to the following Operating System(s):

    - This information is not Operating System specific




    ---Solution---

    In the command window of the /admin/debug.cgi page, run the following command.
    /usr/sbin/sshd


    If no errors are displayed, you should be able to SSH into the system.


    If these error messages are displayed

    ================================
    Could not load host key: /etc/ssh/ssh_host_key
    Could not load host key: /etc/ssh/ssh_host_rsa_key
    Could not load host key: /etc/ssh/ssh_host_dsa_key
    Disabling protocol version 1. Could not load host key
    Disabling protocol version 2. Could not load host key
    sshd: no hostkeys available -- exiting.
    ================================


    Run the following commands to generate new keys before running the command to start ssh.
    /usr/bin/ssh-keygen -t rsa1 -b 1024 -f /etc/ssh/ssh_host_key -N ''
    /usr/bin/ssh-keygen -d -f /etc/ssh/ssh_host_dsa_key -N ''
    /usr/bin/ssh-keygen -t rsa -f /etc/ssh/ssh_host_rsa_key -N ''