How to execute check and repair on the root file system.

Version 1

    After a hard system shutdown, the root file system may become inconsistent. What are the steps to execute a check and repair of the root file system?

    This information applies to the following Operating System(s):

    - This information is not Operating System specific




    ---Solution---

    Boot the system to recovery mode.
    When the system is in recovery mode, point the browser to the
    http://[your snap server] /debug.cgi page.
    A command prompt appears.

    1. umount /dev/md100root
    2. xfs_repair /dev/md100root
    3. Save the output