What is the correct way to install LTO labels so that they are readable by the bar code reader on the LTO Loader?

Version 1

    Cause: If the labels are installed incorrectly (for example, if they are upside down or if a stock spacer is used instead of a brass spacer), the bar code reader cannot read them.

    1. Insert the LTO labels (stickers) so that the numbers face down when the cartridge is in the magazine.
    (If the cartridge is out of the magazine, the bar code should appear up when the hub of the cartridge is pointing toward the floor.)

    2. Use a brass spacer (not a stock spacer).