GEOi card using Backup Exec and MS iSCSI

Version 1

    Problem: When configuring a NEO with a GEOi and running Backup Exec 10D or lower using a Microsoft Windows server, you can not use the Microsoft iSCSI initiator. The changer and tape drive will be present in Windows Device Manager, but the changer will not be available in Backup Exec Devices.

    System event viewer will have following event ID's 7,44, 25 Which the source for the event is going to be ISCSIPRT

    Solution: Use a hardware iSCSI initiator (SNIC) such as the Qlogic 4010C; 4050 or the Adaptec 7211c.